Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL PPX™ Resin PPX7110 - Americas - (PPE+PP) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL PPX™ Resin PPX7110 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl PPX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
NORYL PPX™ 7110 resin is a non-reinforced alloy of polyphenylene ether (PPE) + Polypropylene (PP). This injection moldable grade exhibits high impact resistance and good heat resistance along with hydrolytic and dimensional stability. NORYL PPX7110 resin is an excellent candidate for applications requiring high impact, chemical resistance, and good heat performance.

UL Yellow Card Link E121562-221229
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 10.6 g/10min ASTM D 1238
Temperatura 260 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de tração 1340 MPa ASTM D 638
Resistência à tração no escoamento 35 MPa ASTM D 638
Resistência à tração na ruptura 32 MPa ASTM D 638
Alongamento no escoamento 6.5 % ASTM D 638
Deformação na ruptura 195 % ASTM D 638
Módulo de flexão 1550 MPa ASTM D 790
Impacto Izod com entalhe, 1/8 in 437 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 149 J/m ASTM D 256
Temperatura -30 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Flamabilidade a espessura h HB class IEC 60695-11-10
Espessuras do tubo de teste 1.0 mm -
ASTM Dados
DTUL @ 66 psi 113 °C ASTM D 648
DTUL @ 264 psi 77 °C ASTM D 648
Temperatura de amolecimento Vicat 138 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 970 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 60 - 65 °C -
Pré-secagem - tempo 2 - 4 h -
Umidade do processamento ≤0.02 % -
Temperatura da massa 260 - 290 °C -
Temperatura do molde 30 - 50 °C -
Zona 1 225 - 275 °C -
Zona 2 240 - 280 °C -
Zona 3 250 - 290 °C -
Velocidade de parafuso 20 - 100 rpm -
Contrapressão 0.3 - 0.7 MPa -
Características
Processamento
Moldagem por injeção, Extrusão de chapas
Aplicaciones
Automóvel
Disponibilidade regional
América do Norte
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.